Polymer Dispersed Liquid Crystal Shutter

AddThis Button

Polymer Dispersed Liquid Crystal Shutter

KEY FEATURES

• Maximum open state transmittance
• Low absorption, non-polarizing design
• No mechanical motion
• High speed binary operation
• High extinction ratio
• Broad thermal performance

DESCRIPTION

An Optical Shutter is a two-state device used to rapidly open and close a light path (from lens to film, for example). Optical Shutters are typically used to control the amount of time that a light- sensitive material is exposed to optical radiation.

Meadowlark Optics (MLO) manufactures and sells liquid crystal based Optical Shutters for applications requiring active timing control of beam transmittance. Key features of our Optical Shutters include high-speed binary operation, maximum open state transmittance, and high extinction ratio performance.

Read More...

An Optical Shutter is a two-state device used to rapidly open and close a light path (from lens to film, for example). Optical Shutters are typically used to control the amount of time that a light- sensitive material is exposed to optical radiation.

Meadowlark Optics (MLO) manufactures and sells liquid crystal based Optical Shutters for applications requiring active timing control of beam transmittance. Key features of our Optical Shutters include high-speed binary operation, maximum open state transmittance, and high extinction ratio performance. Since these devices are solid state - undesirable mechanical motion, associated noise, and vibration problems are eliminated.

Designed for large format applications with maximum open state transmission, the PDLC Series of Optical Shutters provides a cost-effective solution for applications requiring throughput optimization. This unique PDLC Optical Shutter design enables up to 70% open state unpolarized transmittance across the visible wavelength range. Drive voltage requirements range from ±60 to ±70 V AC. Large aperture sizes (up to 150 mm) are easily accommodated with the PDLC Series. Broad thermal performance is also characteristic of the PDLC Series Optical Shutters.

Read Less...

Specifications - Polymer Dispersed Liquid Crystal Shutter
Retarder Material Nematic liquid crystal
Substrate Material Optical quality synthetic fused silica
Wavelength Range 400 -700 nm
Transmitted Wavefront Distortion 2λ (P-V @ 633 nm)
[λ/2 (RMS @ 633 nm)]
Contrast Ratio 150:1
Switching Speed 30 - 40 ms
Surface Quality 40-20 scratch-dig
Reflectance (per surface) 0.5% at normal incidence
Diameter Tolerance ± 0.010 in.
Operating Temperature Range 10 °C to 60 °C
 

 

Ordering Information
Diameter (in.) Clear Aperture (in.) Thickness (in.) Part Number
1.00 [25.4 mm] 0.37 [9.4 mm] 1.23 [31.24 mm] PCS - 100 - λ
2.00 [50.8 mm] 0.70 [17.8 mm] 0.75 [19.05 mm] PCS - 200 - λ
3.00 [76.2 mm] 1.60 [40.6 mm] 1.00 [25.4 mm] PCS - 300 - λ